Microsoft provides generic bda drivers for CableCARD/OpenCable devices on 64-bit windows. They will pair the CableCARD with your tuner devices. Provide the information, such as the "CableCARD ID" and the "Host ID", to the cable company. You can also reach this page by typing the local IP address on your network of your HDHomeRun Prime, directly in the browser's address box.ģ. This page contains information about your tuner device, including the CableCARD pairing information. This will open a page in your default browser. Click the Device ID link in the "Device Input" column on the Silicondust's configuration window (the link that says "1317874D" in the screenshot above for example). Get the CableCARD (cable company may ship it to you, or it may be brought to you by their technician).Ģ. Please follow your device makers' instructions to under go the pairing procedure. You need to call your cable company (Comcast for example) and ask them to provide a CableCARD and pair it with your tuners. HDHomeRun Prime and other CableCARD devices (also known as OpenCable devices) require a CableCARD from you cable TV company. If it takes too long, you can also try closing MC and restarting it. Some times MC may miss the devices' broadcast in one round and the next round may take longer to arrive. There are times when this wait may need to be longer. However, for HDHomeRun Prime, each time you start MC, you need to wait a little for MC to discover the tuners before you can use them. Also expand "Advanced" section and make sure "DLNA Controller (control other DLNA devices)" checkbox is checked.Īfter doing the above you should be able to run Media Center's Television setup tool to scan for channels and set up EPG. Check the checkbox "Use Media Network to share this library and enable DLNA". Run Tools > Options and choose "Media Network" on the left panel. This is done through existing DLNA support in Media Center. Media Center must listen on the network and discover the existence of HDHomeRun Prime tuners. You can also click Scan button under "CableCARD" (for HDHomeRun Prime) or "Digital Antenna" (for HDHomeRun Connect or Extend) to test and make sure you can find channels.īecause HDHomeRun tuners are network tuners, you must make sure JRiver Media Center is allowed through the firewall on your computer.įor HDHomeRun Prime, there is another step as this device does not use bda drivers. This is important especially for BDA tuners (for ATSC and DVB-T/C/S), such as "HDHomeRun CONNECT", "HDHomeRun Extend", etc. Under the first tab "Configuration", click "BDA Compatibitity Mode" drop-down list and select "J River Media Center". You need to install "HDHomeRun Software for Windows" regardless whether you decide to install the "App" as the "App" does not install the setup program.Īfter installing, you should run "HDHomeRun Setup". Note that for Windows 10, there is also a "HDHomeRun App for Windows 10". This will install the drivers and a setup program. "HDHomeRun Software for Windows" is the software that should be installed. Here is a screen shot of the Silicondust's download page: To use HDHomeRun tuners, you should install HDHomeRun software from Silicondust first, then configure MC to use them. To enable MC to be able to access these tuners, users need to ensure that MC is allowed through the Windows Firewall. These devices provide a virtual TV tuner driver available to all PC's across the network (as opposed to being in one PC). Silicondust makes a range of network-based TV Tuners under the HDHomeRun brand that is popular with many users. For such channels, use a DMS device capable of tuning to ATSC 3.0 channels. Note: BDA architecture does not seem to be able to handle the new ATSC 3.0 signals. If your device is not already covered in MC, we will add special treatment in our next update. If you have trouble getting these tuners to work, please post on the "Television" board and ask for help. In MC these are called "digital tuners" and are used for ATSC terrestrial signals and DVB-T (terrestrial), DVB-C (cable), and DVB-S (satellite) signals.Ī small number of these devices may need special coding in MC. In JRiver Media Center they are referred to as "digital tuners." Most tuners in this category work out of box in MC after you install the drivers supplied by the device manufacturer, or by Microsoft. Tuners of this category include digital tuners for ATSC, DVB-T/C/S. 2.3 CableCARD devices on 64-bit WindowsīDA stands for "Broadcast Driver Architecture." It is a Microsoft standard for digital video capture on Microsoft Windows operating systems.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |